Applications and Solutions for Anti-Slip Glass

I. Core Overview and Key Parameters (Haibote Glass Standards)

1. Core Definitions and Processes

• Definition : Made with safety glass as the base material and featuring a non-slip surface treatment, it achieves “ Transparent + Non-slip + Safety ” Triple functionality.
• Mainstream process (Sorted by durability):
• Ceramic sintered anti-slip dots : High temperature ( 600–700℃ ) Fuse ceramic particles with glass, Mohs hardness ≥6 , never peels off, resistant to acids and alkalis, easy to clean, suitable for high‑traffic areas / Wet area.
• Acid-etched anti-slip : Chemical etching creates micron‑scale pits, resulting in a fine texture, excellent light transmission, and an integrated anti‑slip layer bonded to the glass—ideal for indoor use. / Low-traffic scenario.
• Micro-embossing / Sandblasting : Physical texture formation, low cost, moderate slip resistance, suitable for temporary use. / Low-requirement scenario.
• Non-slip coating : Coated with wear-resistant resin; quick to apply, available in custom colors, with moderate durability—suitable for light‑load indoor use.

2. Core Performance Metrics (Mandatory)

II. Application Scenarios + Landing Plan (including precise parameters)

Scene 1 : Indoor dry area (residential) / Office / Exhibition hall floor, stair treads)

1. Scene characteristics

Dry environment, moderate foot traffic, emphasis on openness and aesthetics; low risk of slipping, but basic slip resistance is required.

2. Deployment Plan (Parametric Configuration)

3. Installation and Acceptance

• Substrate: cement screed, moisture content ≤8% , no hollow sounds.
• Installation: Transport the glass in a vertical position, use vacuum suction cups, and ensure uniform joint gaps. 2–3 mm ).
• Acceptance criteria: The surface shall be free of scratches, with uniform anti-slip texture, and provide slip resistance when walked on in a dry condition.

Scene 2 : Indoor wet area (bathroom / Kitchen / Pool changing rooms, shower room floors)

1. Scene characteristics

Long-term dampness and water stains / Oil stains, walking barefoot, and a high risk of slipping—require Anti-slip in high-humidity conditions + Waterproof + Easy to clean 。

2. Deployment Plan (Parametric Configuration)

3. Installation and Acceptance

• Base layer: Apply waterproofing ( JS/ Polyurethane), water-tightness test ≥24h No leakage.
• Installation: Place rubber pads under the glass base to prevent direct contact; ensure proper drainage slope. ≥1%。
• Acceptance criteria: No slipping when walking on a wet surface, no water leakage at the seals, and no delamination of the anti-slip dots.

Scene 3 Public building / Commercial space (shopping mall) / Station / Hospital corridors, elevator cabs, stage floors)

1. Scene characteristics

High pedestrian traffic, frequent foot traffic, requires High wear resistance + High anti-slip + Easy to clean + Security Transparency , Public safety requirements are stringent.

2. Deployment Plan (Parametric Configuration)

3. Installation and Acceptance

• Base layer: Steel structure / Concrete substrate, flatness tolerance ≤1.5mm/m 。
• Installation: The pendant is precisely positioned (tolerance ≤1mm ), the glass is evenly stressed and shows no shaking.
• Acceptance: No wear or degradation under high-frequency stepping; slip resistance remains stable in wet conditions; permeability meets design specifications.

Scene 4 : Outdoor / Landscape (balcony / Terrace / Rooftop gardens, scenic boardwalks / Viewing platform, ramp)

1. Scene characteristics

Open-air environment, rainwater / Frosting / Snow accumulation, large temperature differences, required High weather resistance + Anti-slip in high-humidity conditions + Structural Safety + Fall protection 。

2. Deployment Plan (Parametric Configuration)

3. Installation and Acceptance

• Base layer: anti-corrosion treatment for steel structures, load-bearing capacity ≥ Design value 1.5 Times.
• Installation: Glass Joint Seams ≤3mm , Weather-resistant sealant (warranty) 15 Year), drainage is smooth.
• Acceptance: Wet State / The frost‑free condition ensures safe operation, with no structural deformation and no seal aging.

III. General Construction and Acceptance Standards

1. Standard Construction Process

1. Detailed design (confirmation of slip resistance class, fabrication process, dimensions, and load requirements) →

2. Substrate preparation (leveling) / Waterproof / Steel structure) →

3. Glass processing (tempering) / Laminated + Anti-slip treatment) →

4. On-site measurement verification (error) ≤1mm ) →

5. Glass handling (vertical placement, foam protection, vacuum suction cups) →

6. Installation and Fixing (Pendant) / Structural adhesive, with evenly spaced joints) →

7. Sealing and caulking (weather-resistant sealant, fully filled with no air bubbles) →

8. Cleaning and Maintenance →

9. Acceptance (Anti-slip) + Safety + Appearance + Function)

2. Critical Control Point

• Processing Sintering temperature 600–700℃ , to prevent glass deformation; laminated PVB/SGP Bubble-free, adhesive strength ≥1.5 N/mm² 。
• Installation : The substrate must be smooth and level, with moisture content meeting the specified requirements; glass shall not come into direct contact with metal—use elastic shims; sealant must be neutral and covered by a warranty. ≥10 Year.
• Transportation : Store vertically, protect against impacts and scratches; do not lay flat or stack.

3. Haibote Glass Service Support

• Free detailed design, drawing production, and material estimation; custom slip-resistance grading. / Texture / Size.
• Provide Tempered / Laminated Safety Inspection Report.
• On-site technical guidance and standardized installation to ensure successful implementation of the plan.
• After-sales warranty: Sintered type 15 Year, acid-etched type 10 Year, coated type 5 In the year, quality issues will be handled free of charge.

IV. List of Common Standard Configurations

1. 8mm Tempered + Acid-etched anti-slip ( R10 ) : Indoor dry area floor / Stairs, dry condition COF≥0.65 , great value for money.

2. 10mm+1.52PVB Laminated + Ceramic sintering ( R11 ) : Bathroom / Kitchen wet area, wet condition COF≥0.6 , safe and durable.

3. 12mm+1.52PVB Laminated + Ceramic sintering ( R12 ) : Shopping mall / Station public walkways, wear-resistant ≥1000 Turn, high-traffic adaptation.

4. 15mm+2.28SGP Laminated + Composite anti-slip ( R13 ) Scenic area boardwalk / Outdoor platform, wet condition COF≥0.7 , fall protection / Weather-resistant.