Foshan glass factory hotel stair handrail curved steel glass most curved radian can reach how much?
Release time：
Nov 11,2024
The maximum bending arc of the bent steel glass is affected by many factors, including but not limited to the thickness of the glass, processing technology and equipment capabilities. The following are some specific instructions for the most curved arc of bent steel glass:
1. General Scope
In the process of bending steel glass, the radian radius is usually limited. Some data indicate that the radius of bent steel glass can be processed to about two meters and five meters, but more specifically, the radius requirements vary depending on the thickness of the glass. For example, 5, 6, 8mm thick bent steel glass requires a radius of 1200mm, 10, 12mm thick bent steel glass requires a radius of 1500mm, and 15mm thick bent steel glass requires a radius of 1800mm. At the same time, the maximum limit of the height of the bent steel glass is 2850mm, and the maximum limit of the radius is 20000mm.
2. special processing capacity
In some special cases, through advanced processing technology and equipment, the arc of bent steel glass may exceed the above general range. For example, it is mentioned that the minimum radius of bent tempered glass (a special kind of bent steel glass) can reach 400mm or less (in two-stage processing) under specific processing conditions. However, these special processing capabilities often rely on high-end equipment and technology, and may require additional cost and time.
Comparison of 3. and hot bending glass
Compared with bent steel glass, hot-bent glass has greater flexibility in arc processing. Hot bent glass can usually be processed in a range of 0 degrees to 360 degrees, which makes it advantageous in many application scenarios that require complex radians. However, hot bending glass is prone to the problem of color difference during processing, and special attention needs to be paid to the selection and use of ink.
In summary, the most curved arc of bent steel glass is affected by many factors, and different manufacturers and processing technologies may have different processing capabilities. When choosing bent steel glass, it is recommended to customize it according to specific application scenarios and needs, and consult professional manufacturers for more accurate processing capabilities and price information.
Related News
Share to
Fill in your requirements
Copyright © 2024 China Guangdong Haibo Safety glass Technology Co., Ltd