How to ensure clear patterns in custom-made Zhuhai art glass partitions with laser-engraved internal carvings? Key points analysis!
Release time:
Mar 21,2025
How to Ensure Clear Patterns in Laser Engraved Glass? Key Points Analysis!
Laser engraved glass (Subsurface Laser Engraved Glass) is a process that uses laser focusing technology to create tiny cracks inside the glass, thus carving three-dimensional patterns. However, if not properly controlled during production, it may lead to blurry patterns, uneven brightness, or missing details. To ensure that the engraved patterns are clear, the following key points should be noted:
1. Select high-quality glass material
Key points:
- Use high-transmittance glass (such as ultra-white glass) to avoid affecting the clarity of the engraving due to impurities in ordinary glass.
- The inside of the glass must be free of bubbles and impurities, otherwise the laser points will appear scattered or uneven.
2. Precise control of laser focus
Key points:
- When engraving, the laser focus must be precisely aligned with the inside of the glass; focus deviation will cause the engraving points to be blurry or have ghosting.
- Use a high-precision laser control system to ensure that each engraving point is evenly distributed, avoiding excessive energy causing the internal cracks of the glass to spread.
3. Optimization of point density and engraving parameters
Key points:
- Engraving point density (DPI): If the point spacing is too large, the pattern will appear rough; if the point spacing is too small, it may cause the light refraction to be chaotic. The appropriate point spacing should be set according to the complexity of the pattern.
- Laser power and pulse time: Too high power will easily produce micro-cracks, while too low power will result in insufficient pattern brightness; precise adjustment is required.
4. Avoid excessive glass thickness affecting perspective
Key points:
- When the glass is too thick, the pattern may appear blurry due to light refraction. It is recommended to choose glass of appropriate thickness (such as 8mm~12mm) to ensure uniform light penetration.
- For excessively thick glass, double-sided engraving or multi-layer engraving technology should be used to ensure overall clarity.
5. Reasonable light source and viewing angle
Key points:
- Good background lighting can improve the visibility of the pattern, and white or RGB LED backlighting can enhance the three-dimensional effect of the engraving.
- When the viewing angle is too biased, some details may be difficult to identify, so it is recommended to adjust the light source direction to enhance the three-dimensional effect.
Summary: To ensure the clarity of the pattern in laser-engraved glass, the key lies in:
1. Choose high-transmittance glass material without impurities.
2. Precisely control the laser focus to avoid focal length errors.
3. Optimize the engraving point density and laser parameters to ensure clear details.
4. Choose the appropriate glass thickness according to the application scenario to avoid excessive thickness affecting imaging.
5. Use appropriate light sources and viewing angles to enhance the engraving effect.
Strictly controlling these factors can produce high-quality, clear and three-dimensional laser-engraved glass patterns!
Related News
Share to
Fill in your requirements
China Guangdong Haibo Special Glass Technology Co., Ltd. Unified Social Credit Code: 91440101MA5AT33G12 Contact Numbers: General Manager Cao, 13178822749; General Manager Wei, 13533794186.