Home page

Which model of Changhong hot-melt embossed glass shower room sliding door is more suitable?

Release time:

Dec 13,2024

There are significant differences between integrated bending and splicing of hollow glass bending strips in multiple aspects. Below is a detailed comparative analysis:

1. Definition and Manufacturing Process

Integrated bending aluminum strip

Definition: The integrated bending aluminum strip is formed by bending a whole piece of aluminum material through specialized equipment, without the need for splicing.

Manufacturing process: The manufacturing process is relatively complex, including multiple steps such as selection of aluminum material, bending processing, and bonding with glass. Attention must be paid to the bending degree of the aluminum strip, the choice of adhesive, and other issues during the production process to ensure the quality and performance of the product.

Spliced corner aluminum strip

Definition: The spliced corner aluminum strip is formed by connecting multiple segments of aluminum material using corner codes.

Manufacturing process: The manufacturing process is relatively simple, but it requires the use of corner codes for splicing and fixing at the four corners, followed by sealing with sealant.

2. Performance Characteristics

Integrated bending aluminum strip

Sealing performance: Due to the seamless connection of the overall structure, it has better air tightness and water tightness, effectively preventing condensation and air leakage inside the hollow glass.

Strength and stability: It has high strength and stability, better protecting the hollow glass and improving its safety and durability.

Corrosion resistance: Aluminum alloy materials have good corrosion resistance, are not easily oxidized or corroded, and extend the service life of hollow glass.

Spliced corner aluminum strip

Sealing performance: Although sealant is used for sealing during the manufacturing process, there may be tiny gaps at the splicing points, affecting the sealing performance.

Cost: The manufacturing cost is relatively low, suitable for occasions with lower sealing performance requirements and limited budget.

3. Application Scenarios

Integrated bending aluminum strip

More suitable for occasions with higher performance requirements for hollow glass, such as high-rise buildings, cold regions, and places that need to maintain a constant indoor temperature for a long time.

It can also be used for building curtain walls, balcony doors and windows, soundproof windows, etc., with good thermal insulation and soundproofing performance, while also beautifying the building's appearance.

Spliced corner aluminum strip

More suitable for occasions with lower sealing performance requirements and limited budget, such as temporary buildings, warehouses, etc.

4. Appearance and Aesthetics

Integrated bending aluminum strip

The appearance is more concise and integrated, without corner inserts or splicing marks, making it more aesthetically pleasing.

Spliced corner aluminum strip

There are corner inserts or splicing marks at the four corners, which may have a certain impact on the visual appearance.

In summary, there are significant differences between integrated bending and splicing of hollow glass bending strips in terms of definition and manufacturing process, performance characteristics, application scenarios, and appearance and aesthetics. When choosing, one should weigh based on specific needs and budget to select the most suitable type of aluminum strip.

What is the difference between integrated bending and splicing of hollow glass bending strips in Foshan tempered glass factory?

Shenzhen tempered glass factory, source factory for glass, the principle and process of autoclave laminated glass.