Home page

Foshan glass factory cold storage electric heating glass door installation matters needing attention

Release time:

Nov 12,2024

Cold storage electric heating glass door in the installation need to pay attention to many aspects, in order to ensure its stable performance, safe and reliable. The following are some key installation considerations:

1. preparation

Accurate measurement: Before installation, it is necessary to accurately measure the opening of the cold storage to ensure that the size of the door leaf and the door frame is suitable for the opening size of the cold storage, and take into account the thickness of the door leaf, leaving enough space for opening and closing.

Check accessories: check whether the hardware accessories such as electric heating elements, sealing strips, door locks, hinges, etc. are complete and reliable in quality.

2. installation steps

Determine the opening direction: According to the actual needs and usage habits of the cold storage, determine the opening direction of the electric heating glass door, and mark the corresponding position on the door frame.

Install the door frame: place the door frame on the opening of the door and fix it according to the marked position. Use an auger to drill holes along the preset holes in the door frame, and then use screws to firmly fix the door frame on the opening.

Install the door leaf: put the door leaf on the door frame, keep the door leaf parallel to the ground, and confirm that the door leaf position is correct. Then, use an auger to drill holes along the preset holes of the door leaf, and then fix the door leaf on the door frame with screws. Note that the screws should be fixed tightly to avoid loosening of the door leaf and air leakage.

Installation of electric heating elements: According to the design requirements, install electric heating elements on the door leaf or door frame, and ensure that their wiring is correct and firm.

Install the sealing strip: install the sealing strip on the contact surface of the door frame and the door leaf to improve the sealing performance of the door and prevent the leakage of cold air.

3. commissioning and inspection

Debugging the electric heating function: Turn on the power supply and test whether the electric heating element is working properly to ensure that it can be heated quickly when needed to prevent the door leaf from freezing.

Check the tightness: gently push the door leaf by hand to check whether it opens and closes smoothly, and observe whether the sealing strip fits the door frame tightly. If there is no smooth or tight sealing, it should be adjusted in time.

Check hardware accessories: check whether the hardware accessories such as door locks and hinges are firm and reliable. If they are loose or damaged, they should be replaced or fastened in time.

Post -4. maintenance

Regular cleaning: Clean the electric heating glass door of the cold storage regularly to remove the dust and dirt on the surface and keep it beautiful and hygienic.

Check the wires and components: Check the connection of the wires and heating elements regularly to ensure that they are not loose or damaged. If there is any abnormality, it should be replaced or repaired in time.

Avoid impact: During use, avoid using hard objects to hit the door leaf or door frame, so as not to damage its structure or affect the sealing performance.

In summary, the installation of electric heating glass doors in cold storage needs to pay attention to many aspects, including preliminary preparation, installation steps, debugging and inspection, and later maintenance. Only in accordance with the norms of operation and maintenance, in order to ensure that the performance of the cold storage electric heating glass door is stable, safe and reliable.

Five famous foreign glass building case sharing

Foshan hollow glass factory home improvement moisture-proof waterproof doors and windows glass recommend which glass is good?