What are the principles and specifications of Foshan toughened glass manufacturer AG anti-glare glass?
Release time:
Oct 29,2024
We are Guangdong anti-glare glass factory, which can provide you with high cost-effective anti-glare glass price. We also have excellent anti-glare glass processing technology and experienced anti-glare glass installation methods. The application effect of anti-glare glass is the industry standard.
AG anti-glare glass, also known as anti-reflection glass or non-reflective glass, its principle is mainly through a special process to treat the glass surface, reduce the reflectivity of light, reduce the interference of ambient light, thereby improving the clarity and energy of the picture, Make the image clearer and more realistic.
Specifically, this treatment makes the light scattered on the glass surface, forming diffuse reflection, and avoiding the glare phenomenon caused by concentrated reflection.
The specifications of AG anti-glare glass mainly include the following aspects:
Thickness: Capacity range: usually between 0.2mm and 12mm.
Common specifications: including 0.3mm, 0.55mm, 0.7mm, 1.1mm, 1.3mm, 1.8mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, etc.
recommend thickness: 3mm thick glass after etching the finished thickness is usually between 2.75mm to 2.93mm.
Size: Capacity range: The maximum panel can reach 3660mm * 2440mm.
recommend size (length and width): between 600mm and 1800mm. It should be noted that the size will affect the price and cutting rate. The higher the cutting rate, the higher the cost performance.
Gloss: Test method: Use a gloss meter to select multiple points on the original sheet for testing, and take the average value.
Procurement specifications: 100±10 and 80±10 are common, and incoming inspection may be carried out according to more relaxed standards (such as 100±13 and 80±15).
Note: For large-size glass, the difference between the maximum and minimum glossiness of the same piece of glass is limited (such as ≤ 20).
Transmittance: In the visible light wavelength range of 380 ~ 700nm, the transmittance of AG anti-glare glass is usually higher, reaching 88% Min. above (measured by spectrophotometer).
Other parameters: roughness: the technical range is between 0.06μm and 2.8μm, the common parameters are 0.15μm to 0.4 μm, and the recommend roughness is 0.2±0.1 μm.
Haze: The technical range is between 1% and 70%, the common parameters are 5% to 40%, and the recommend haze is 10±5%.
Appearance quality: including the inspection of round defects (such as bubbles, white spots, scratches, etc.), linear defects (such as scratches, scratches, etc.) and convex defects (such as impurities protruding from the glass surface).
Dimensional deviation and thickness inspection: the allowable deviation of length and width is ± 0.5mm.
The allowable thickness deviation is ± 0.2mm, and the thickness difference of the same piece of glass is also limited.
It should be noted that the above specifications may vary depending on the manufacturer, product use and customer needs. Therefore, when choosing AG anti-glare glass, it is recommended to communicate with the supplier in detail according to specific needs.
Today's sharing is over. Those who want to know the cost of Guangdong Haibo anti-glare glass can consult Haibo special glass to help you solve your doubts about the cost of Guangdong Haibo anti-glare glass!
Related News
Share to
Fill in your requirements
China Guangdong Haibo Special Glass Technology Co., Ltd. Unified Social Credit Code: 91440101MA5AT33G12 Contact Numbers: General Manager Cao, 13178822749; General Manager Wei, 13533794186.