Foshan toughened glass manufacturers need to pay attention to these places when using laminated glass to make screens.
Release time:
Oct 25,2024
When using wire glass to make a screen, you need to pay attention to the following aspects:
1. glass selection and quality
Thickness and quality: The thickness and quality of the glass must meet the relevant national standards to ensure its structural strength and safety.
Light transmittance and aesthetics: the choice of good light transmittance of the glass, both to ensure adequate indoor light, but also to show the unique beauty of the glass.
2. design and installation
Measurement accuracy: Before installation, it is necessary to accurately measure the size of the glass and the length of the stainless steel tube or other frame material required by the screen to ensure installation accuracy.
Wire clamping method: select the appropriate wire clamping method, such as the use of special wire clamping parts or wire clamping glue, etc., to ensure that the glass will not move or fall off.
Installation details: During the installation process, it is necessary to ensure that the connection between the screen frame and the wall or other supporting structures is firm and reliable, and at the same time, pay attention to avoid glass breaking and hurting people.
3. Maintenance and Maintenance
Avoid scratches: wire glass screen should be kept away from sharp, sharp knives or other objects to prevent scratches or damage to its surface.
Cleaning method:
Avoid using corrosive cleaning agents in daily scrubbing.
If the stain is difficult to remove, it can be washed with mild detergents such as beer and vinegar.
For the patterned glass, should avoid the use of steel ball and other abrasive cleaning tools, you can use a toothbrush dipped in kerosene or gypsum powder for cleaning.
If there is a thick oil stain accumulated on the glass, you can spray a layer of detergent on the glass, and then cover it with a layer of plastic wrap, and keep it for about ten minutes. After tearing off the plastic wrap, the oil stain can be easily cleaned up.
Regular maintenance: regular inspection and maintenance of the clamped glass screen, timely detection and treatment of potential problems, such as looseness, damage, etc.
4. Safety and Protection
Prevent breaking: in the use of the process, to avoid the wire glass screen for violent impact or knock, in order to prevent its broken.
Warning signs: If the screen is installed in an area with a large flow of people, warning signs can be set at appropriate positions to remind people to avoid collisions.
In summary, the use of wire glass to do the screen, need to pay attention to the selection and quality of the glass, design and installation, maintenance and maintenance, as well as safety and protection and other aspects of the problem. Through reasonable selection and maintenance, the aesthetics and safety of the wired glass screen can be ensured.
Related News
Share to
Fill in your requirements
China Guangdong Haibo Special Glass Technology Co., Ltd. Unified Social Credit Code: 91440101MA5AT33G12 Contact Numbers: General Manager Cao, 13178822749; General Manager Wei, 13533794186.