Home page

How to install fireproof glass for fireproof windows

Release time:

Jul 26,2024

We are a Guangdong fireproof glass factory, which can provide you with the latest fireproof glass prices. We also have the latest fireproof glass processing technology and experienced fireproof glass installation methods. Customer feedback on the fireproof glass effect is very good.

The installation of fireproof glass in fireproof windows is an important step, which is related to the fireproof performance and use safety of fireproof windows. The following are the detailed steps for installing fireproof glass in fireproof windows:

Preparation before 1. installation

Check the fire window and accessories: when accepting the fire window, carefully check whether the quantity, specification, grade and various accessories are qualified and complete according to the supply contract to ensure that the quality of the fire window is no problem.

Check the fireproof window frame and window sash for warping, deformation and glass damage. If necessary, repair is required before installation.

Clean the installation environment: clean the inner and outer surfaces of the installation notch of the fire window, and keep the surface clean, dry and free of dust and oil stains.

2. installation steps

Correction of verticality: when installing the fire window, the verticality of the front, back, left and right must be corrected with a level ruler or by hanging lines to ensure that the fire window is horizontal, vertical and consistent in height.

Fixed window frames: window frames must be integrated with the building and connected to the wall by wood or iron pieces. After the steel window frame is installed, cement mortar must be poured between the window frame and the wall, and the maintenance can be used normally for more than 24 hours.

Installation of hardware accessories: the location of hardware accessories installation holes should be accurate, so that the hardware accessories can be installed flat, firm, to meet the requirements of use.

Install fireproof glass:

Positioning and seam: when installing fireproof glass, the seam on all sides must be uniform. This helps to ensure that the fireproof glass expands freely when heated and does not break due to crushing.

Fill the gap: after positioning, fill the gap on the four sides with fireproof cotton. The fireproof cotton has good heat insulation performance, which can delay the spread of fire and improve the fireproof performance of the fireproof window.

Edge sealing treatment: after the gap is filled, edge sealing strip is required to ensure the sealing between the fireproof glass and the window frame.

Inspection and adjustment:

After the installation is completed, the fire window should be fully inspected to ensure that the fire glass is firmly installed, the gap is filled and the edge is tight. If any problems are found, they should be adjusted and repaired in time.

3. considerations

Glass installation orientation:

When installing embossed glass and frosted glass, the pattern of embossed glass should be outdoors, and the frosted surface of frosted glass should be indoors.

Coated glass shall be installed on the outer layer, and the coating layer of single-sided coated glass shall face the room.

Use a suitable sealing material:

For fire windows with high water tightness and air tightness requirements, it is best to use high-quality sealing materials such as silicone sealant for caulking and edge sealing.

Compliance with specifications:

In addition to the above requirements, the installation of fire windows should be strictly in accordance with the requirements of the "Engineering Construction and Acceptance Code. Make sure that the fire window

Fire performance and safety in use comply with relevant standards and specifications.

By following the above steps and precautions, you can ensure the correct installation and safe use of the fireproof glass in the fireproof window.

OK ~ that's all for today's sharing. if you also want fireproof glass or need to know the cost of Guangdong Haibo fireproof glass, you can consult Haibo special glass Cao Haibo to help you solve it faster.Guangdong Haibo fireproof glassdoubts on the cost of oh!

What are the processing technology of dome glass in Guangdong glass factory

What are the characteristics of fireproof glass, can play the role of fire