Inlaid glass
Category:
Home Decoration Glass
Craft Glass
Product Description
I. Product Overview
Inlaid glass is a type of glass that combines Decorativeness and Safety Specialty deep-processed glass, made from tempered glass. / Made by bonding decorative inlays—such as metal wires, colored glass fragments, natural stones, shells, and metal foils—to annealed glass substrates through high‑temperature melting, adhesive lamination, or laminated encapsulation processes, this product offers exceptional aesthetic appeal, diverse styles, and strong customization options. It also provides basic safety protection, making it well suited to high‑end decorative and functional applications. Compliant with relevant architectural glass standards, it can be flexibly customized in specifications and designs to meet the production capabilities of Haibote Glass.
II. Core Features and General Specifications
Project
|
Core Parameters
|
Additional Note
|
Base glass
|
Thickness: 5mm-12mm (Tempered / Annealing); Maximum size: 2440×3660mm (Connectable)
|
Prioritize tempered glass to enhance safety and ensure compatibility with various engineering applications.
|
Inlay material
|
Metal wire (diameter 0.8mm-2.0mm ), stained glass (thickness 3mm-5mm ), natural stone (thickness 2mm-4mm ) etc.
|
Materials, colors, and patterns can be customized to meet customer requirements.
|
Processing technology
|
High-temperature fusion embedding (temperature 600℃-700℃ ), laminated inlay ( 1.14PVB/1.52PVB ), Adhesive Inlay (Neutral Silicone Sealant)
|
Laminated glass is preferred for outdoor applications. / High-temperature melting; for indoor applications, an adhesive bonding process can be used.
|
Safety performance
|
Tempered substrate: impact resistance ≥30J ; Laminated inlay: No shattering or flying debris upon breakage, with strong adhesion. ≥1.5 N/mm²
|
Compliant with GB 15763.2 Safety Glass for Buildings Part 2 Section: Tempered Glass
|
Transmittance
|
30%-75% (Adjusted according to inlay density and material)
|
The higher the embedding density, the lower the light transmittance, allowing it to meet varying privacy requirements.
|
Weather resistance
|
Temperature resistance range -20℃-120℃ , ultraviolet irradiation 500h No discoloration, no delamination.
|
For outdoor use, an additional UV‑protective coating can be applied.
|
Environmental friendliness
|
Formaldehyde-free and radiation-free; the inlay materials can be made from eco-friendly recycled materials.
|
Suitable for high‑environmental‑standard settings such as hotels, residential buildings, and schools.
|
III. Application Scenarios and Implementation Plans
Scene 1: High-end indoor decoration (hotel) / Clubhouse / Villa / Luxury mansion)
1. Application scenarios
Hotel lobby feature walls, entryway partitions, staircase railings, and corridor wall panels; villa living room screens, dining room backdrops, and bathroom partitions; high-end club interior walls and artistic installations.
2. Core Requirements
With a sophisticated aesthetic, cohesive design, and excellent privacy, it seamlessly balances decorative appeal with fundamental security, while complementing a wide range of interior styles, including Chinese, European, and modern minimalist.
3. Landing Plan and Parameters
Project
|
Specific parameters
|
Configuration Recommendations
|
Base glass
|
6mm Tempered white glass / Ultra-white glass, single-sheet dimensions ≤1800×2400mm (Large size can be spliced)
|
Ultra-clear glass substrates enhance light transmission and highlight the texture of inlay materials, making them ideal for high-end applications.
|
Inlay Configuration
|
Plan 1 (Chinese style): 1.0mm Stainless steel wire (bronze color) + Colored frosted glass fragments (dark green) / Off-white), inlay density 30%-40% ; Plan 2 (European style): Stained glass strip (gold) / Silver border) + Shell inlay, inlay density 25%-35%
|
Adopting a laminated inlay process ( 1.52PVB ), ensuring that the inlay material is securely fixed and preventing it from coming loose.
|
Surface treatment
|
Matte surface (light transmittance 40%-50% ), edge fine grinding chamfering ( R≥3mm )
|
Matte, anti-glare finish enhances the decorative texture; chamfered edges prevent bumps and injuries.
|
Fixing method
|
Metal frame (stainless steel) / Aluminum alloy, wall thickness ≥2mm ) + Apply neutral silicone structural adhesive, leaving a joint. 3-5mm
|
Frame rust-proofing treatment, structural adhesive curing time ≥7 Heavens, make sure it is securely fastened.
|
Matching lighting
|
LED Flexible LED strip ( 3000K Warm light, power 10-12W/m ), hidden at the edge of the glass
|
Light filtering through the glass accentuates the layered patterns of the inlay, enhancing the decorative effect.
|
4. Installation Key Points
- The base layer must be smooth and dry, with a moisture content of… ≤8% , to prevent delamination later on
- Glass is handled using vacuum suction cups and transported in a vertical position to prevent surface scratches and impacts to the edges and corners.
- The sealant at the joints is applied evenly and free of air bubbles, with consistent seam widths. 2-3mm ), smooth surface
- The lighting circuits are insulated, and maintenance access panels are provided to facilitate future servicing.
5. Acceptance Criteria
- Appearance: The inlay materials are evenly arranged, with no delamination or loosening; the surface is free of scratches, bubbles, and color variations.
- Safety: The tempered glass substrate meets particle size specifications, the interlayer shows no delamination, and the edge chamfers are smooth.
- Features: Uniform light transmission, with no dark spots or flicker when the lights are on, and privacy performance that meets design requirements.
Scene 2: Commercial Space Decoration (Shopping Mall) / Exhibition Hall / Brand store)
1. Application scenarios
Mall wayfinding signage, brand‑image walls, exhibition‑hall partitions, and back panels for jewelry counters; storefront signs, window glass, and decorative panels for checkout counters.
2. Core Requirements
Strong visual impact and high brand recognition; wear‑resistant, scratch‑proof, and easy to clean; customizable branding. LOGO Or custom designs, tailored for commercial traffic scenarios.
3. Landing Plan and Parameters
Project
|
Specific parameters
|
Configuration Recommendations
|
Base glass
|
8mm Tempered glass, single-piece dimensions ≤2000×3000mm , can be拼接 into a large-format layout
|
8mm Tempered glass offers greater strength, making it ideal for high‑traffic, collision‑prone environments in shopping malls.
|
Inlay Configuration
|
Plan 1 (Brand Image Wall): Metallic Foil (Gold) / Silver) + Transparent glass fragments inlaid to form the brand. LOGO , inlay density 20%-30% ; Plan 2 (Showcase / Counter): Colored glass strip (brand color) + Metal wire, forming a minimalist geometric pattern, with inlay density 15%-25%
|
Utilizing a high-temperature melting process, the inlay material is fully fused with the substrate glass, offering excellent wear and scratch resistance and easy cleaning.
|
Surface treatment
|
Polished surface (light transmittance 60%-70% ), with an anti-fingerprint coating on the surface
|
The polished finish enhances a high‑gloss texture, while the anti‑fingerprint coating makes everyday cleaning easier and helps minimize stain buildup.
|
Fixing method
|
Point-supported pendant (stainless steel, diameter ≥8mm ) + Back bolt fixing, spacing ≤600mm
|
The point-supported, fixed system does not obstruct the inlaid pattern, enhancing the visual appeal while ensuring structural integrity.
|
Wear resistance
|
Mohs hardness ≥6 Grade: No scratches or marks from keys or other hard objects.
|
Designed to suit high‑touch scenarios in shopping malls, extending service life.
|
4. Installation Key Points
- On-site measurements are precise, with minimal error. ≤2mm , ensure that the glass dimensions match the installation location.
- The pendant is securely installed and can support the load. ≥ of the glass weight 2 times, to prevent shedding
- The display window glass must be sealed with a waterproof sealant, and the joints should be treated with weather-resistant sealant to prevent rainwater infiltration.
- After installation, wipe the surface with a dedicated cleaning agent to remove stains and fingerprints.
5. Acceptance Criteria
- Appearance: The inlaid pattern is clear and intact, with no deformation or delamination; the surface is free of scratches and fingerprints.
- Stability: The pendant is securely fastened, the glass does not wobble, and stress is evenly distributed.
- Features: Light transmittance meets design specifications, wear-resistant and easy to clean, with a clearly legible brand logo.
Scene 3: Residential and Public Buildings (Doors and Windows) / Partition / Guardrail)
1. Application scenarios
Sliding doors for residential balconies, floor-to-ceiling windows, interior partitions, and bathroom doors and windows; corridor partitions and guardrail glass in schools, hospitals, and nursing homes.
2. Core Requirements
Safe and durable, with strong privacy protection and energy efficiency, it features a simple yet sophisticated design that meets the safety requirements of both residential and public spaces.
3. Landing Plan and Parameters
Project
|
Specific parameters
|
Configuration Recommendations
|
Base glass
|
5mm-6mm Tempered glass, single-piece dimensions ≤1500×2000mm , Window and door glass can be made into insulated laminated glass.
|
For door and window applications, it is recommended to use insulated laminated glass. 5+12A+5 ), while also providing thermal and acoustic insulation
|
Inlay Configuration
|
Plan 1 (Household partition): Fine metal wire ( 0.8mm ) + Frosted glass fragments, inlay density 35%-45% ; Plan 2 (Railing glass): Wire mesh ( 100×100mm ) + Transparent glass, inlay density 10%-15%
|
Guardrail glass should preferably incorporate a metal wire mesh insert to enhance impact resistance and ensure safety.
|
Surface treatment
|
Semi-matte surface (light transmittance 50%-60% ), with safety chamfers on the edges.
|
The semi-matte finish balances privacy and natural light, while safety‑rounded edges help prevent accidental cuts.
|
Fixing method
|
Doors and windows: aluminum alloy window frames + Glass is secured with glazing beads, leaving a gap. 2-3mm ; Guardrail: Metal support frame + Structural adhesive application, spacing ≤500mm
|
Seal gaps around doors and windows with sealant to provide waterproofing and dust protection; treat guardrail brackets with anti-rust coating to ensure load-bearing safety.
|
Energy-saving performance
|
Insulated Hollow Glass: Thermal Transmittance Coefficient K Value ≈2.4-2.8 W/( square meter ·K) , soundproofing ≥30dB
|
It meets residential energy-saving requirements, reduces air-conditioning energy consumption, and minimizes outdoor noise disturbance.
|
4. Installation Key Points
- Before installing window and door glass, check the flatness of the window frame for any deviations. ≤3mm/m
- Elastic spacers are used to support the glass between the glass and the window frame; direct contact with metal is prohibited to prevent stress concentration.
- After the guardrail glass is installed, a load‑bearing test must be conducted to ensure it can withstand… ≥500N/m horizontal force
- After installation is complete, inspect the seals to prevent water and air leaks.
5. Acceptance Criteria
- Safety: After breakage, tempered glass fragments into small, blunt‑edged particles; the embedded materials remain securely in place; and the guardrail meets the required load‑bearing standards.
- Appearance: The surface is free of scratches and bubbles, the inlaid pattern is uniform, and the seams are even and smooth.
- Functions: Doors and windows are tightly sealed, with no water or air leakage; insulated glass units are free of fogging and condensation; sound and thermal insulation meet the required standards.
IV. General Specifications for Construction and Acceptance
1. Construction Process (Ready for Implementation)
Detailed Design (Confirming Pattern, Dimensions, and Manufacturing Process) → Base glass processing (cutting, tempering) → Pre-processing of inlay materials (cleaning, cutting) → Inlay processing (high-temperature melting) / Laminated / Adhesive) → On-site measurement verification → Base Treatment → Glass installation and fixing → Sealing and caulking → Cleaning Acceptance
2. Critical Control Point
- Processing stage: The high-temperature melting temperature is maintained at 600℃-700℃ , to prevent glass deformation; the laminating process must ensure PVB The film is completely melted, with no bubbles and no delamination.
- Installation requirements: The substrate must be smooth and secure; the fixing method should meet the specific application needs; use a neutral, weather‑resistant sealant; warranty included. ≥10 year
- Transportation: Glass shall be stored vertically, protected with foam packaging to prevent impacts and scratches; stacking in a horizontal position is prohibited.
3. Haibote Glass Service Support
- Free detailed design, drafting, and material estimation; custom inlay patterns, materials, and dimensions tailored to your specific requirements.
- We rigorously control production quality and provide certificates of conformity, tempered‑glass test reports, and inlay‑process inspection reports.
- On-site technical guidance to assist the construction contractor in ensuring compliant installation and successful implementation of the plan.
- We provide after-sales support: if issues such as delamination or cracking arise, we’ll promptly dispatch a technician to your home for resolution.
V. List of Common Standard Configurations
- 6mm Tempered + Laminated inlay ( 1.52PVB ): Suitable for hotel feature walls and villa screens, with a light transmittance of 40%-50%
- 8mm Tempered + High-temperature fusion inlay: Suitable for store image walls and display windows, with a light transmittance of… 60%-70%
- 5+12A+5 Hollow tempered glass + Inlay: Suitable for residential doors and windows, as well as partitions. K Value ≈2.4-2.8 W/( square meter ·K)
- 6mm Tempered + Metal wire mesh inlay: suitable for guardrails and partitions in public buildings, with impact resistance. ≥30J
Fill in your requirements
China Guangdong Haibo Special Glass Technology Co., Ltd. Unified Social Credit Code: 91440101MA5AT33G12 Contact Numbers: General Manager Cao, 13178822749; General Manager Wei, 13533794186.